In this day and age, it is always best to be cautious. After all, you just never know what is going to happen or who you can trust. If you do not take steps to protect yourself, there is a pretty good chance that you’re going to become a victim of a crime at some point or another. At the very least, your risks are going to increase significantly. Sliding doors can be a real vulnerability. They’re much more difficult to secure than conventional doors. Sensors can be installed on sliding doors and garage doors in NJ. With that being said, you will definitely want to think about installing a sensor on your sliding door. You’ll find out how to do just that below.
Sensors and alarms can make a big difference when it comes to protecting your home. Sensors can achieve many purposes. First and foremost, the sensor can be used to trigger an alarm. Once the alarm begins sounding in your home, there is a good chance that the criminal will get scared and run off. It is also possible to use the sensor to alert the authorities. This will increase the probability that the criminal will be caught before they can make off with your belongings.
Finally, it is possible to decrease your insurance with a good security system. Installing a sensor on your sliding door is always wise!
Door And Frame
First and foremost, you need to check the door and frame. Are both of them flush with one another? If not, you need to rectify the situation right away. Once you’ve gotten things flush, you will be able to move on to the next step. If they’re not flush, there is a chance that the sensor will not work correctly.
Now, you should begin installing the sensor. It will be much easier than you might initially believe. First, you should make sure that the larger component is positioned at the top of the door’s frame. The smaller component should be attached directly to the door. It is a good idea to install the components a few inches from the side of the frame. This will decrease the chance that the smaller component is going to be knocked off when the door is shut harder. Make sure that both components are securely attached to the door before moving forward. Otherwise, you might have to replace them soon.
So, what do you do if the door and frame at not flush with one another? Well, you might be able to fix the problem with a little bit of double sided tape. You can buy this tape pretty much anywhere, including at your local big box store. Attach the bigger component at the top. Then, you’ll need to install the smaller unit. Make sure that the smaller unit is flush with the top one. You may need to use the tape to get it perfect. If they’re not flush, the sensor will not work correctly.